Please remember that
TRENDware
wireless devices are pre-configured to connect
together, right out of the box, with the default settings.
1
1
You will need a broadband Internet access (Cable
Modem/DSL Modem) subscription.
Consult with your Cable/DSL provider for proper installation
of the modem.
Connect the modem to a wireless Internet router
.
If an Ethernet port is available on the router, connect a
computer that is equipped with an Ethernet Network adapter
to the router.
Install the drivers for the wireless network adapter (such as
the
TRENDware
TEW-303PI
)
into the computer.
See the
Quick Installation Guide
included with the TEW-303PI.
Please refer to the following sections of this manual for additional information
about setting up a network:
Networking Basics-
learn how to check your IP Address; share printers and
files.
Using the Configuration Utility-
learn the settings you must use on each
computer in your network for successful communication.
Troubleshooting
learn how to check for the proper installation of the network
adapters' drivers and other tips for troubleshooting the network.
Setting up a Wireless Ad-Hoc Network
2
2
3
3
4
4
5
5
10
Fig. 4.2
