To communicate on the network all devices must have the same settings
for the following properties:
SSID -
(Service Set Identifier) is a name that identifies a wireless network. Access
Points and wireless clients attempting to connect to a specific WLAN (Wireless
Local Area Network) must use the same SSID. The default setting is
default
.
BSS Type -
Click on the pull-down menu; select from the following options:
Infrastructure -
connecting the WLAN using an Access Point (The
default
setting.)
Ad-Hoc -
wireless mode used when connecting directly to computer
equipped with a wireless adapter in a peer-to-peer environment.
Channel
The
default
channel setting is channel 1. However, the TEW-303PI will
automatically select the channel to match the channel setting for the selected
Access Point. In Ad-Hoc mode, the channel must be manually set to the same
channel for each wireless adapter.
Configuration Utility - Configuration
17
This Configuration
Screen displays the
default settings for
the TEW-303PI.
Fig. 6.4
Tx Rate:
The factory setting is set to 22 Mbps; however,
Tx Rate
settings are
automatically determined by the TEW-30
3
P
I
depending on the distance and the Tx
Rate of the access point.
Channel:
Displays the radio channel information. By default, the channel is set to 1.
Radio On/Off:
When necessary, click on this button to turn off the wireless radio
signal. Click on Radio On to enable the wireless signal transmission.
Link Quality / Signal Strength:
Displays the Link Quality for the TEW-30
3
P
I
wireless connection to the Access Point. The Signal Strength represents the
wireless signal between the Access Point and the TEW-30
3PI
. The percentage
coincides with the graphical bar.
Data Rate:
Displays the statistics of data transmitted and received.
