51
Factory Reset
The Factory Reset helps you to reset the device back to the default
setting from the factory. All of the configuration will be reset, the IP
address of the device will be set to default setting 192.168.0.1.
Backup Setting
The backup tool allows you to backup the current setting of the Switch.
Press the
“Backup”
button to save the setting.
To restore saved settings from a file, you must specify the backup file
and press
“Restore”
button.
Figure 29. Backup Setting
Note: when restoring a recorded file, the current password will not be erased.
52
Firmware Upload
The Firmware Upload helps you to backup or upload firmware
from/to the Switch. Once you need to backup the current firmware of
the Switch, press the
“Backup”
button to save the current firmware of
the Switch; To restore or upgrade firmware to the Switch, you must
specify the firmware file and press
“Upload”
button to proceed the
firmware upload.
System Reboot
Provides to a safe way to reboot the system. Ensure the configuration
has been saved, or all the changes you just made may be lost after
system reboot.
Summary of Contents for TEG-448WS - Switch
Page 34: ......