TRENDnet TEG-448WS - Switch, User Manual, Page: 23 / 34

37
Example 4:
Setting Tag VLAN on two switches. Switch 1’s VLAN 1 (2 ~ 3 ports)
have access to the Switch 2’s VLAN 1 (2 ~ 3 ports).
Tag VLAN setting example
The settings of VLAN group for two devices are same.
Step1: Set Switch1’s VLAN1 port 1and 4~48 to “Not Member”, then apply setting.
Step2: Set Switch2’s VLAN1 member as Switch1.
Step3: Uplink two switches via Port 4.
38
Trunk Setting
The Trunk function enables the user to cascade two or more devices t0
increase bandwidth.
The user can set up to six Trunk groups. Enter a Trunking Name,
select the ports to be a member of the trunk, and click “Apply”.
Figure 19. Trunk Settings
Note: The selected trunk port setting must set to the same VLAN
group.
Mirror Setting
Port Mirroring is a method of monitoring network traffic. The Switch
forwards a copy of each incoming and/or outgoing packet from one
port of to another port on the Switch where the packet can be studied.
It enables the manager to keep close track of switch performances.