39
The following options are available:
TX (transmit) mode:
this mode will duplicate the data transmit from
the source port and forward to the sniffer port.
RX (receive) mode:
this mode will duplicate the data that’s sent to
the source and forward it to the sniffer port.
Both (transmit and receive) mode:
this mode will duplicate both the
data transmit from and data that send to the source port, then it will
forward to the sniffer port.
None mode:
this mode will not duplicate data to the Sniffer port.
40
IEEE 802.1p Default Priority
This feature displays the status Quality of Service priority levels of
each port, and for packets that are untagged, the switch will assign the
priority in the tag depending on your configuration.
Figure 21
Summary of Contents for TEG-448WS - Switch
Page 34: ......