TRENDnet TEG-30102WS, User Manual, Page: 53 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
49

Click on the Forwarding Ports ratio button that applies to your configuration.

Click Apply.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
View the current VLAN database
Bridge > VLAN > VLAN Current Database
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Bridge, click on VLAN, and click on Private VLAN.
3. View the current VLAN database in the table.
If the entries span multiple pages, you can navigate page number in the Page field and
click Go or you can click First, Previous, Next, and Last Page to navigate the pages.
Asymmetric VLAN
Bridge > VLAN > Asymmetric VLAN
Enabling asymmetric VLAN will you to create VLANs with overlapping untagged VLAN
member ports for specific applications.
Asymmetric VLAN is a feature that restricts traffic on VLAN trunk ports. Below is a step
on enabling and disabling the feature.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Bridge, click on VLAN, and click on Asymmetric VLAN.