TRENDnet TEG-30102WS, User Manual, Page: 5 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
1
Product Overview
TEG-30102WS
Package Contents
In addition to your switch, the package includes:

Quick Installation Guide

Power cord

RJ-45 to RS-232 console cable (1m / 3.28 ft.)

Rackmount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
TRENDnet’s 10-Port 2.5GBASE-T Web Smart+ Switch with eight 2.5GBASE-T
ports and two 10G SFP+ slots, model TEG-30102WS, delivers advanced
management features with an 80Gbps switching capacity. The TEG-30102WS is
equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds
capable of up to 2.5Gbps over existing Cat5e or better cabling. This rack
mountable IPv6 ready switch comes with an intuitive web-based interface.
Advanced traffic management controls include IP routing, VLAN, QoS, access
controls, link aggregation, troubleshooting, and SNMP monitoring, making this a
powerful solution for SMB networks.
Hardware Design
Provides 8 x 2.5GBASE-T ports and 2 x 10G SFP+ slots for high-speed network
connections, and 1U rack mount design.
2.5GBASE-T Technology
Connect 2.5GBASE-T supported devices at 2.5Gbps for increased throughput over
existing Cat5e or better cabling
Smart Fans
Smart fans save energy by auto-adjusting the fan speed and use based on cooling needs
IP Routing
Supports up to 32 IPv4/IPv6 static routes
Network Management
A broad range of network configurations are supported by: link aggregation, VLAN,
bandwidth controls, IGMP, loopback detection, port mirroring, QoS, per port MAC
restriction, and dynamic ARP inspection
Troubleshooting
Traffic statistics and a convenient cable diagnostic test aid in network troubleshooting