TRENDnet TEG-30102WS, User Manual, Page: 36 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
32
Click the drop-down list and select one of the following options.

Active - The specific aggregator will broadcast and respond to LACPDU (LACP
Data Unit) packets. This setting enables the dynamic LACP feature for the trunk.

Passive - The specific aggregator will not broadcast LACPDU packets, but it will
respond to them. This setting disables the LACP feature for the trunk

Manual - Enables static port trunking and disables the LACP feature for the
trunk. (Static link aggregation).

Disable - Disables the static port trunk and disables the LACP feature.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
View your trunk group status information
Bridge > Trunk Config > LACP Group Status
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Bridge, click on Trunk Config, and click on LACP Group Status.
3. View your trunk group status information.

System Priority - Preassigned setting that cannot be modified. This value
applies to the switch.

System ID - MAC address value assigned to the individual switch. This value
cannot be modified.

Group: # The ID number of the trunk (link aggregation group).