TRENDnet TEG-30102WS, User Manual, Page: 26 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
22
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Set the switch date and time
System > System Time
This section allows you to set the switch time and date settings. Please note if using an
SNTP server to sync time and date settings, please make sure the IP address, default
gateway settings, and DNS settings are configured correctly, otherwise, the switch will
not be able to reach the SNTP server to obtain time and date settings.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on System, and click on System Time.
3. Review the settings. Click Apply to save changes.

Clock Mode - Displays if system time and date is set manually Local Time or
obtained automatically from a network time server SNTP.

Current Time – Displays the current system time and date.

Time Zone – Displays the current system time zone.

Clock Mode: Select Local Time to manually configure your date and time
settings or select SNTP to configure your switch to automatically obtain
settings from an network time server.
o
Local Time – Allows you to manually set the time settings. If selecting
this option, under Local Time Settings, manually enter your date and
time settings.

Date Settings – Enter your date settings (YYYY/MM/DD).

Time Settings – Enter your time settings (HH:MM:SS)
o
SNTP – Allows you to configure your switch to pull time and date
settings automatically from a network time server. I f selecting this
option, under Simple Network Time Protocol (SNTP) Settings, enter
your time server settings.

SNTP Primary Server – Enter the primary network time server
IPv4, IPv6 address, or the Domain name.

SNTP Secondary Server – Enter the secondary network time
server IPv4 or IPv6 address.

Time Zone – Click the drop-down list to select your time zone.