TREND T4, Manual

Page: 2 / 22

-1-
T4
Dear Customer
Thank you for purchasing this Trend product, we
hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
☎
If you require further safety advice,
technical information or spare parts,
please call our technical support
department on 01923 224681 or visit
www.trend-uk.com.
TECHNICAL DATA
Voltage: UK & Eire 230V
UK 115V
Europe 230V
Ampage: 230V 3.7A
115V 6.6A
Power input 850W
No load speed 11,500-32,000 min-1
Router carriage 2 columns
Router carriage stroke 35mm
Revolver depth stop 3-step, turret stop
adjustment with
graduation
Collet size 6.35mm (
1
⁄
4
”)
6mm & 8mm
Cutter diameter max. 30mm
Weight 3.5kg
Fuse: UK & Eire 230V 13A in plug
UK & Eire 110V 16A in mains
Europe 230V 13A in mains
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
CONTENTS
TECHNICAL DATA _____________________1
SAFETY ____________________________2-3
ELECTRICAL SAFETY _________________4
MANUFACTURERS DECLARATION ______5
ITEMS ENCLOSED ____________________5
DESCRIPTION OF PARTS_______________6
ASSEMBLY & ADJUSTMENT
– Dust Extractor Spout __________________7
– Switching On & Off____________________ 8
– Depth of Cut _________________________ 8
– Fitting & Removing Cutters _____________ 9
– Speed Control ______________________ 10
– Fine Height Adjuster _________________ 10
– Fixing Points________________________ 10
OPERATION
– Cutting Direction & Feed Speed ________ 11
– Moulding Natural Timbers _____________ 11
– Side-Fence Routing __________________ 12
– Template Guide Bush Routing __________ 13
– Carving & Grinding___________________ 14
– Bearing Guided Cutters _______________ 15
– Freehand Routing ___________________ 16
– Batten Routing ______________________ 16
MAINTENANCE & CARE_______________17
ENVIRONMENTAL PROTECTION ________17
GUARANTEE ________________________17
SPARE PARTS
– Spare Parts List __________________18-19
– Spare Parts Diagram _________________20
INTENDED USE
The router is intended for routing grooves, edges,
profiles and slots as well as copy routing in wood,
wood based products and plastic. At reduced
speed with the appropriate router cutter fitted
non-ferrous alloys can also be routed.
MANU/T4 v2.0 30/8/07 1:08 pm Page 1