-17-
MAINTENANCE AND CARE
Cleaning
■
Keep the machine clean at all times. Some
maintenance products and solvents may
damage the plastic parts, these include
products containing Benzene, Trichloroethyle
Chloride and Ammonia.
■
Never use any caustic agents to clean the
plastic parts.
T4
Ensure machine is isolated from
power supply.
It is advisable to have the
brushes replaced by an
authorised Trend Service Agent.
The router will also be given a
thorough inspection.
■
Undo brush cap (1) using flat head
screwdriver.
■
Remove brush (2).
■
Insert new brush ensuring brush body is
correct orientation for aperture.
■
Refit brush cap (1) and tighten.
■
Repeat for other brush.
■
Always use original T4 spare parts.
Changing Brushes
Lubrication
■
The bearings of the machine need no
lubrication, as they are sealed. The two
plunge columns on the routing base should
be slightly oiled from time to time.
■
Keep the cooling vents on the motor housing
clean and unobstructed at all times. Blow out
any dust and dirt at regular intervals.
■
Visually check the carbon brushes. In the
event of excessive sparking, they may need
changing.
■
After about 40 operating hours inspection by
a authorised Trend service agent is
recommended.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste.
Accessories and packaging should be sorted for
environmental-friendly recycling.
Separate collection. This product must
not be disposed of with normal household
waste.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by retailer
when you purchase a new product.
Please call Trend Technical Support for advice
as to how to dispose of unwanted Trend
electrical products in an environmentally safe
way or visit www.trend-uk.com/environmental
Business Users
Please call Trend Techinical Support or visit
www.trend-uk.com/environmental/b2b
GUARANTEE
The machine carries a manufacturers guarantee
in accordance with the conditions on the
enclosed guarantee card.
For the location of your nearest Trend Service
Agent, please call the telephone number at the
back of this manual.
1
2
MANU/T4 v2.0 30/8/07 1:08 pm Page 17