Page
9
of
54
7.
Turn the chair back over.
8.
Ensure the rear strut is connected to the bracket on the back of the seat by squeezing the two plastic
buttons on either site and inserting it into the metal clasp. Occasionally it can twist slightly, so ensure it
is straight and fully engaged into the clasp. You should hear a satisfying click when inserted correctly.
9.
Fully extend the footplate (making sure to unhook the elastic over the footplate lever first (if you have
the upgraded footplate). This will take two hands and may need support from another person. You can
balance the seat by holding the front of the seat. At the same time unfold the jacks (black plastic
triangular shaped pieces at the edge of the footplate) so that the footplate now rests on the jacks as
below:
10.
You can then fold down the armrests and extend and lock the folding handlebars (if applicable) as below.
Summary of Contents for GTE MK II
Page 32: ...Page 32 of 54...
Page 52: ...Page 52 of 54 9 Appendix 1 Advanced Trouble Shooting...
Page 53: ...Page 53 of 54...
Page 54: ...Page 54 of 54...
