Page
44
of
54
Transit securing information for the aircraft hold (see diagram below)
1) Do not attempt to remove wheels.
2) Ensure wheels are connected and in the LEAN (vertical) position with the seat upright
2) Ensure battery is securely docked in its box unless removed.
3) Disconnect the joystick cable connector, under the armrest. Note white markings
4) Power up the joystick for 3 seconds, then shut down, to prevent electric shock.
5) Release brakes (clutch levers up, both sides)
6) Secure with rope or similar and bungee cord, to secure floor mounts as sheet 2
7) Ensure ropes are taut but not tensioned.
Warning:
Mechanically tensioning the ropes/straps will likely result in extensive damage.
Weight
of chair
(unoccupied) with handlebars:
Standard
(16”)
GTE with Nickel Metal Hydride battery
35kg
Standard
(16”)
GTE with Li-ion battery
36kg
Wide (19”) GTE
with Nickel Metal Hydride battery
37kg
Wide (19”) GTE
with Li-ion battery
38kg
Summary of Contents for GTE MK II
Page 32: ...Page 32 of 54...
Page 52: ...Page 52 of 54 9 Appendix 1 Advanced Trouble Shooting...
Page 53: ...Page 53 of 54...
Page 54: ...Page 54 of 54...
