Page
24
of
54
7.
Disassemble rear castor assembly. To release the rear strut, squeeze the two plastic buttons either side
of the head of the shock absorber and pull the head towards you and out of the clasp.
(When replacing this structure, simply reverse the initial movement, squeezing the two plastic buttons
on either site and inserting it back into the metal clasp. Occasionally it can twist slightly, so ensure it is
straight and fully engaged into the clasp. You should hear a satisfying click when inserted correctly.)
8.
Once this is separated, fold down the strut behind the seat, docking the rear wheel into the slot in the
back of the battery box and resting the top of the shock absorber against the top of the seat. There is
another piece of elastic at the base of the rear strut which will hook over the clasp on the back of the
seat. This will stop the rear wheel assembly from dropping down whilst the wheelchair is transported
(see picture below).
Summary of Contents for GTE MK II
Page 32: ...Page 32 of 54...
Page 52: ...Page 52 of 54 9 Appendix 1 Advanced Trouble Shooting...
Page 53: ...Page 53 of 54...
Page 54: ...Page 54 of 54...
