Page
14
of
54
Right hand side (RH) connectors
If the LH/RH sticker has been removed, you can line the connector up by looking at the pins within the
connector to see where they fit.
19.
Gently press the connector into position and then turn the plastic collar clockwise until it secures into
position. It is essential that this is not done with excess force or you could damage the connection.
Repeat for both wheels.
20.
Activate the shock absorber again by pressing the silver switch upwards and push the handlebars
downwards to recline the seat and lift the footplate up.
21.
Fold back the plastic jacks on the footplate and If required push the footplate back in for transferring
22.
Activate the shock absorber a final time to bring the seat back to an un upright position or set it at the
preferred position for use.
23.
Switch on the power by flipping the switch on the right-hand side and the display should illuminate with
the letters FL
for ‘Full Battery’. If the display shows ‘C1’ it means one or both ‘Manual/Power’
levers are
upwards and in manual mode. Push them down and the error code should disappear.
24.
You are now ready to go!
Summary of Contents for GTE MK II
Page 32: ...Page 32 of 54...
Page 52: ...Page 52 of 54 9 Appendix 1 Advanced Trouble Shooting...
Page 53: ...Page 53 of 54...
Page 54: ...Page 54 of 54...
