Section 2: Important Safety Information
4220ST & 4420ST Light Utility Vehicles 700-504M
8/05/08
8
Table of Contents
24690
838-303C
Danger: Battery
Safety Decals
Your Treker comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
Read and follow their directions.
1. Keep all safety decals clean and legible.
2. Replace all damaged or missing decals. Order new safety
decals through your Land Pride dealer.
3. Some new equipment installed during repair requires safety
labels to be affixed to the replaced component as specified
818-543C
Danger: Guard Missing
24691
23536
838-629C
Warning: Pinch Point or Crushing Hazard
by Land Pride. When ordering new parts or components,
also request corresponding safety decals.
4. Refer to this section for proper label placement. Install new
decals as follows
a.
Clean area on which decal is to be placed.
b.
Spray soapy water on the surface where decal is to be
placed.
c.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
d.
Squeeze out air bubbles with edge of a credit card.
