treesse FUSION SPA, Operating And Maintenance Manual

Page: 11 / 40

11
Fusion Spa
minipool
EN
U
FILLING THE MINIPOOL
Filling is carried out by following the figures on the side
(follow the instructions for your keypad).
This occurs through a concealed spout in the compartment
on the bottom of the minipool and is indicated by the
illuminated red LED.
Filling takes place from the bottom of the bathtub, and
once it has finished the tank is filled.
After reaching the correct level, the system automatically
stops the filling and makes available the functions of
whirlpool, recirculation, ozone and heater.
During minipool use the system automatically maintains
the water level equal to the edge of the bathtub.
The minipool must ALWAYS remain connected to both the electrical grid and plumbing (filling and draining): this is
necessary for filtering, cleaning the filters and maintaining the minipool's water levels and temperature.
ALWAYS cover the minipool when inactive. This protects it from the sun's rays, prevents dirt from accumulating
inside the bathtub and keeps it from losing heat, thus optimising the efficiency of the heater.
DRAIN AND SUCTION PUMPS
The minipool drain is positioned on the bottom, hidden
by the finishing plate.
This solution makes the use of the bathtub safer and
more comfortable.
To clean the drainage grate, just manually remove the
finishing plate since it is simply resting on the bottom.
For this operation see page 14.
Automatic filling using the keypad
simultaneously pressing the and keys activates the
automatic filling of the minipool, controlled by two level sensors and
confirmed by the "FILL" LED
Automatic filling using the keypad
pressing the key activates the
automatic filling of the minipool, controlled by two level sensors and
confirmed by the fixed blue key.