treesse FUSION SPA, Operating And Maintenance Manual

Page: 23 / 40

23
Fusion Spa
minipool
EN
T
Water treatment
TABLE OF ACTIVITIES
Below is a table that summarises all the activities necessary for proper maintenance. Those in blue should be carried
out frequently.
ACTIVITY
INFORMA-
TION
FREQUENCY...
CHECK PH VALUES,
HARDNESS AND
ALKALINITY
1
page 22
Why check:
Minipool water that is always clean and clear, but above
all bacteriologically pure and free of algae, guarantees safety and
comfort for users and offers the pleasure of a safe, relaxing bathtub.
How often:
the minipool water (both its basic parameters and the
concentration of disinfectants and additives) should be checked
1 -
2
times a week under normal conditions of use (e.g., family use) or
daily
if the minipool is used intensively (e.g., wellness centres) or if
it is installed outdoors. In this latter case, check the water especially
after intense rain.
Which products to use:
reactive strips or tablets, liquid reagents
or instruments for measuring the parameters are readily available in
specialised shops.
For a disinfectant, the Manufacturer recommends its products (
bromine
- 20 g slow-release tablets - combined with the use of
ZERO PROBLEM
antialgae
and
OXIGEN ATTIVO GR granular oxygen
).
If
algae has already developed in the bathtub
, the problem should
be solved as soon as possible, emptying the minipool, brushing the
walls and bottom of the bathtub thoroughly and performing a shock
treatment with liquid oxygen (
OXI BLU
).
DISINFECTION AND
CLEANING OF THE WATER
(FROM POLLUTANTS AND
ALGAE)
2
page 26
CHANGING THE FILTER
SAND
3
page 30
Why check:
the sand filtration system is certainly the best, but to be
truly effective there must be sufficient sand in the filter and it must
not be packed.
Hard, packed sand is no longer an effective filter bed because some
preferential channels have been formed which must be eliminated as
soon as possible.
How often:
the sand should be checked and, if necessary, replaced
at least once a year.
If flocculants are used, employ minimum doses and check the sand
even more frequently.
Which products to use:
in the
BATHTUB MAINTENANCE KIT
you can
find the specific product
FILTRO-CAL LQ
for cleaning and sterilising
the sand.
EMPTYING AND FILLING
THE MINIPOOL
4
page 32
5
page 33
How often and which products to use:
the frequency of this operation
depends on many factors, for example more or less intensive use,
outdoor or indoor installation, water quality, etc.
In general it is good practice to empty the bathtub every
30 days
by
performing an energetic disinfection of the pipes, using the products
contained in the
BATHTUB CLEANING KIT
.
CLEANING THE SURFACES
6
page 34
How often and which products to use:
cleaning the bathtub is an
important operation that should be carried out
frequently (at least
twice a week)
, by brushing the walls and the bottom of the bathtub.
It is also essential to sterilise the pipes and the recirculation system, an
operation that can be easily carried out before emptying the pool with
the products contained in the
BATHTUB CLEANING KIT
.
The Manufacturer recommends the use of its products as they have
been tested and found to be compatible with the bathtub. The use
of different products may cause damage to surfaces over time that
is not covered under warranty.