background image

26

Fusion Spa

 

minipool

EN

Water treatment

Various micro-organisms (bacteria, fungi, algae) can 

proliferate in the water of the minipool, fostered by the 

constant heat of the water. 

Only some of them can be a real danger for those who 

use the minipool, however these micro-organisms can 

proliferate quickly making the water cloudy and the 

surfaces slippery.

There are essentially two types of treatments to be 

carried out:

2A

Disinfection

 (oxygen or bromine).

2B

Water cleaning

 (anti-algae, flocculants, etc.).

The products must be requested  from  the  Manufac-

turer: For methods of use carefully follow the product's 

instructions.

The use of chlorine for the disinfection of the 

minipool is strongly discouraged

 as it is not 

suitable  for  the  construction  material  (stratified 

resin) and not very stable at high temperatures.

When using multiple additives avoid using them 

at the same time (try to schedule the activities 2-3 

days apart) and note their compatibility: read the 

information labels or request information from the 

product dealer.

After performing the treatments - only when there 

are no people in the water - activate the whirlpool 

function for 20 or 30 minutes and do not use the 

minipool until the disinfectants/additives have dropped 

to normal values.

Frequently check the concentration of additives 

in the minipool water (test strips are readily 

available). Some are sensitive to the action of the 

sun's rays or are diluted by rain or the organic substances 

left in the water by users. 

The frequency of disinfection also depends on 

the intensity of use of the minipool. If it is used in 

public areas (e.g., wellness centre), the water must 

be checked and disinfected on a 

daily basis

 by 

specialised and trained personnel.

2A

DISINFECTION

 

(

ELIMINATION OF THE BACTERIAL AND FUNGAL LOAD)

For a complete sanitisation of the water we recommend 

the use of 

bromine

 with reactivation using 

granular

 

oxygen

Oxygen treatment (domestic use)

This method of sanitisation is ideal for domestic use, i.e., 

when the minipool is used by a limited number of people 

for non-prolonged periods. It naturally creates crystalline 

water and is less aggressive towards the skin and hair, it 

does not have an unpleasant odour and does not alter the 

pH of the water.

Usually oxygen-based treatments combine two components: 

oxygen tablets and a liquid activator. 

Bromine treatment (intensive use)

Bromine is a halogen and should be added to water at 

pre-established intervals (usually in the form of water-

soluble tablets). 

Unlike chlorine, bromine is also effective at high 

temperatures and with higher pH. 

Not producing chloramines, it does not cause unpleasant 

odours, does not irritate the eyes and skin and is easily 

reactivated.

2

DISINFECTION AND CLEANING OF THE WATER

More information

SUPER-DISINFECTION (SHOCK TREATMENT)

This operation is an intensive disinfection treatment 

that consists in adding a quantity of disinfectant to the 

water that is slightly higher than what is used normally 

in order to oxidise the organic substances and eliminate 

the micro-organisms and algae.

The frequency is variable: it becomes indispensable if 

the minipool remains unused for a long time, but it can 

vary if it is used intensively, if it is installed outdoors 

because it is more exposed to pollutants and to the 

sun's rays.

In general, the minipool used by a family needs super-

disinfection every 15 days, if used by a wellness centre 

at least once a week.

After completing the treatment, do not use the 

minipool until the value of the disinfectant has dropped 

to normal values.

Shock treatment can be performed using the product 

OXI BLU

, made with stabilised liquid oxygen.

Summary of Contents for FUSION SPA









































Reviews: