5
INSTALLING BATTERIES
You need two 9V alkaline batteries to power your detector.
Cautions:
Use only fresh battery of the required size and recommended type.
1. If the detector is on, turn the power switch (on the control panel) to
POWER OFF .
2. Press on the battery compartment cover and slide the cover off in
the direction of the arrow.
3. Connect the battery with the battery connector taking care of the
polarity. Then put the battery into the compartment.
4. Replace
the
cover.
Cautions:
Always remove old or weak battery; battery can leak chemicals
that can destroy electronic parts.
If you do not plan to use the detector for a week or more, remove
the battery.
Dispose of old battery promptly and properly.
You can extend battery life by using headphones, which require less
power than the built-in speakers.
OPE
N
