14
•
Slayer
The Traxxas TQ Radio System
TQ RADIo SYSTEM RUlES
Each time you prepare to run your Slayer,
you must clear your frequency to be sure
no one else in the area is using the same
channel as you.
There are six possible channels,
numbered 1 through 6. Each is
represented by a color. Look at the
crystal plugged into the back of your
transmitter to determine which channel
your truck is assigned to.
Always turn your TQ transmitter on first and off last. This
procedure will help to prevent your Slayer from receiving stray
signals from another transmitter, or other source, and running out
of control.
Always have the transmitter and receiver turned on before you
start the engine. Never turn the radio system off while the engine
is running. The on/off switch in the model only turns the receiver
on and off. It does not turn off the engine.
Always use new or freshly charged batteries for the transmitter, and
make sure the receiver batteries are fresh. Weak batteries will limit
the radio signal between the receiver and the transmitter. Loss of
the radio signal can cause you to lose control of your Slayer.
Remember, always turn the
TQ transmitter
on first
and
off last
to avoid damage to
your Slayer. Never turn the
radio off while the engine
is running.
CH.2
CH.1
Always turn your
transmitter on first.
Then start your engine.
1
2
Always turn your
receiver on second.
3
