Travis Industries Xtrordinair 44 Elite, Manual

Page: 83 / 158

For Usable Firebox Volumes above 3.0 ft
3
- Low and Medium Fire
Nominal Required Load Density (wet basis) 12
lb/ft
3
Usable Firebox Volume 4.20 ft
3
Total Nom. Load Wt. Target 50.4 lb
Total Load Wt. Allowable Range 47.88 to 52.92 lb
Core Target Wt. Allowable Range 22.68 to 32.76 lb
Remainder Load Wt. Allowable Range 17.64 to 27.72 lb
Mid-Point
Core Load Fuel Pc. Wt. Allowable Range 7.56 to 12.60 lb 10.08
Remainder Load Pc. Wt. Allowable Range 5.04 to 10.08 lb 7.56 Fuel Piece Moisture Reading (%-dry basis)
Pc. # 1 2 3 Ave.
Core Load Piece Wt. Actual 1 8.10 lb In Range 22.4 26.7 24.2 24.4 In Range 6.51 lb 2.95 kg
2 8.30 lb In Range 27.2 26.9 25.6 26.6 In Range 6.56 lb 2.97 kg
3 7.60 lb In Range 25.6 25.5 23.6 24.9 In Range 6.08 lb 2.76 kg
Core Load Total. Wt. Actual 24.00 lb In Range
Pc. #
Remainder Load Piece Wt. 1 8.60 lb In Range 28 19.7 22.7 23.5 In Range 6.97 lb 3.16 kg
(3 or 4 Pcs.) 2 5.20 lb In Range 20.1 22.3 26 22.8 In Range 4.23 lb 1.92 kg
3 6.40 lb In Range 23.8 25.8 21.6 23.7 In Range 5.17 lb 2.35 kg
4 5.40 lb In Range 21.9 20.6 19 20.5 In Range 4.48 lb 2.03 kg
Remainder Load Piece Weight Ratio - Small/Large 60% In Range ≤ 67% Total Load Ave. MC % (dry basis) 24.0 In Range
Remainder Load Tot. Wt. Act 25.60 lb In Range Total Load Ave. MC % (wet basis) 19.3
Total Load Wt. Actual 49.60 lb In Range Total Test Load Weight (dry basis) 40.01 lb 18.15 kg
Core % of Total Wt. 48% In Range 45-65% Total Fuel Weight Burned During Test Run (dry basis) 40.0 lb 18.15 kg
Remainder % of Total Wt. 52% In Range 35-55%
Actual Load % of Nominal Target 98% In Range 95-105%
Actual Fuel Load Density 11.8 lb/ft
3
Allowable Charcoal Bed Wt. Range (lb) 5.0 to 9.9 Mid-Point
Actual Charcoal Bed Wt. 5.1 lb In Range 7.4
Actual Fuel Load Ending Wt. 0.0 lb Valid Test ≥ 90%
Total Wt. of Fuel Burned During Test Run lb. 49.6 lb
Pc. Wt. Dry Basis
THIS DOCUMENT IS NOT AN ASTM STANDARD; IT IS UNDER CONSIDERATION WITHIN AN ASTM
TECHNICAL COMMITTEE BUT HAS NOT RECEIVED ALL APPROVALS REQUIRED TO BECOME AN ASTM STANDARD.
IT SHALL NOT BE REPRODUCED OR CIRCULATED OR QUOTED, IN WHOLE OR IN PART, OUTSIDE OF ASTM
COMMITTEE ACTIVITIES EXCEPT WITH THE APPROVAL OF THE CHAIRMAN OF THE COMMITTEE HAVING
JURISDICTION AND THE PRESIDENT OF THE SOCIETY.
COPYRIGHT ASTM, 100 BARR HARBOR DRIVE, WEST
5
CONSHOHOCKEN, PA 19428. ALL RIGHTS RESERVED .
83 of 158