32 Operation
© Travis Industries
4120301
100-01286_000
Manual On-Off / Smart Thermostat / Standard Thermostat
Use the thermostat button to cycle through the three thermostat settings (see
Figure 5
).
Figure 5
MANUAL ON/OFF
– The burner will turn on and off using the remote (see
Figure 6
). Press the
On/Off button to control the burner. When off, the display will only show the current temperature.
Figure 6
SMART THERMOSTAT
– While in smart thermostat, the transmitter will control the burner to
achieve the target temperature (see
Figure 7
below). Flame height will be adjusted up or down to
allow operation without turning the burner on and off (also called “smart modulation). To adjust
the target temperature, press the up and down buttons until a suitable temperature is achieved.
Figure 7
STANDARD THERMOSTAT
- While in standard thermostat setting, the transmitter will turn the
burner on and off to achieve the target temperature (see
Figure 8
below). To adjust the target
temperature, press the up and down buttons until a suitable temperature is achieved.
Figure 8
NOTE: if the transmitter batteries go dead while in thermostat setting (standard or smart), the appliance
will shut off after approximately 24 hours.
OFF
ON
SMART
ON
F
AUX
MAX
Look here for the
thermostat setting.
Press the thermostat button to cycle
through the thermostat settings.
OFF
F
AUX
MAX
When in manual setting, the
word “OFF” will appear here.
MAX
F
AUX
MAX
When in smart thermostat
setting, the word “SMART”
will appear here.
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
SMART
ON
F
AUX
MAX
When in standard thermostat
setting, the word “ON” will
appear here.
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
