28 Operation
© Travis Industries
4120301
100-01286_000
Starting the Heater for the First Time
Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will
cure the painted surfaces.
Fumes
from the paint curing and oil burning off the steel will occur. This
is normal. We recommend opening a window to vent the room.
Condensation
may appear on the glass each time you start the heater - this is normal.
Blue Flames
will occur on the heater when it first comes on. After fifteen minutes the flames will turn
a more realistic yellow and orange color.
Verify the power backup and control light batteries are installed (see page 37).
Location of Controls
ACCENT LIGHT
OFF
HIGH
LOW
CONTINUOUS
PILOT
GREEN SMART
PILOT
ON
REMOTE
OFF
PRG
Swing the access door and control cover
down to access the controls on the insert.
°F
Most features will be controlled by the included
remote.
