Operation
29
© Travis Industries
4120301
100-01286_000
Direct Operation
The fireplace may be directly operated from the receiver. The three positions are below (see
Figure 3
):
ON
– Burner turns on (regardless of transmitter settings).
OFF
– Burner turns off (regardless of transmitter settings).
REMOTE
– Burner is controlled by the transmitter.
Figure 3
NOTE
: When the receiver switch is turned to ON or OFF, the mode settings (Accent Light, Blower, Flame
Height, Comfort Control) will remain in the same state as before the switch was moved (i.e.: the receiver
“remembers” the last setting). If you wish to adjust the mode settings use the transmitter mode button to
adjust the settings (see “Mode Controls” on page 33). The thermostat and burner on/off operating
functions will not work on the transmitter.
ON
REMOTE
OFF
PRG
