4
Safety
Precautions
© Travis Industries
4040808
100-01201_000
IF YOU SMELL GAS:
* Do not light any appliance
* Extinguish any open flame
* Do not touch any electrical switch or plug or unplug anything
* Open windows and vacate building
* Call gas supplier from neighbor's house, if not reached, call fire department
This unit must be installed by an authorized person to prevent the possibility of an
explosion. Your dealer will know the requirements in your area and can inform you of
those people considered qualified. The room heater should be inspected and cleaned
before use and at least annually by a qualified service person. More frequent cleaning
may be required due to excessive lint from carpeting, bedding material, etc.
The instructions in this manual must be strictly adhered to. Do not use makeshift methods
or compromise in the installation. Improper installation will void the warranty and safety
listing.
This heater is either approved for natural gas
(NG) or for LPG. Burning the incorrect fuel will
void the warranty and safety listing and may
cause an extreme safety hazard. Direct
questions about the type of fuel used to your
dealer. Check the label and flame adjust knob
on the gas control valve.
Ok
Contact your local building
officials to obtain a permit and
information on any installation
restrictions or inspection
requirements in your area.
Notify your insurance company
of this heater as well.
If the flame becomes sooty, dark
orange in color, or extremely tall,
do not operate the heater. Call
your dealer and arrange for
proper servicing.
It is imperative that control
compartments, screens, or
circulating air passageways of
the heater be kept clean and
free of obstructions. These
areas provide the air necessary
for safe operation.
?
Do not operate the heater if it is
not operating properly in any
fashion or if you are uncertain.
Call your dealer for a full
explanation of your heater and
what to expect.
Gas
•
DO NOT USE OR STORE
FLAMMABLE MATERIALS
NEAR THIS APPLIANCE.
•
DO NOT SPRAY
AEROSOLS IN THE
VICINITY OF THIS
APPLIANCE WHILE IT IS
IN OPERATION.
•
Do not operate if any portion
of the heater was submerged
in water or if any corrosion
occurs.
• Not suitable for operation in
marine environment.
