EN-37
User’s Manual >>
Adjusting White Balance Manually
Manual white balance lets you configure the digital still camera for a particular
light source and other conditions. Note that you must perform manual white
balance under the same conditions you will be shooting. You must also have a
piece of white paper or other similar object on hand in order to perform this
function.
1. Slide the mode switch to [
] .
2. Press the
button. The [PICTURE] menu
appears.
3. Use the
T
/
X
buttons to select [MANUAL
WB], then press the
OK
button.
4. Point the camera at an enclosed gray
card for which you can set the white
balance.
This starts the white balance
adjustment procedure.
5. U s e t h e
S
/
T
b u t t o n s t o s e l e c t
[EXECUTE], then press the
OK
button
to confirm.
The procedure of manual white
balance is complete.
If you with to cancel [MANUAL WB]
setting, select [CANCEL].
6. To exit from the menu, press the
button.
MANUAL WB
BACK :
SET :
EXECUTE
CANCEL
PICTURE
FUNCTION
SETUP
Q
R
G B
WB
EXIT:
SELECT ITEM:
ENTRY:
MANUAL WB
CANCEL
WB
