EN-25
User’s Manual >>
CAMERA MODE
Capturing Images
1. Press the
POWER
button to turn on the
camera.
2. Slide the mode switch to [
].
3. Compose your image in the LCD monitor.
4. Press the shutter button down halfway,
then press it down fully.
Pressing the shutter button down
halfway automatically focuses and
adjusts the exposure.
The focus-area frame turns blue when
the camera is focused and the exposure
is determined.
When the focus or exposure is not
suitable, the frame of the focus area
turns yellow.
If the photographic preview is set to
"ON", the captured image will be
displayed while the image is being
recorded onto the memory.
The LCD monitor darkens in strong sunlight or bright light. This is not a
malfunction.
To prevent your images from being blurred while pressing the shutter
button, always hold it carefully. This is especially important when you
are shooting under low lighting conditions, which your camera may
decelerate the shutter speed to ensure your images are properly exposed.
Pressing the
button changes the LCD display in the sequence of:
Standard Display
J
J
J
J
J
Simplified Display
J
J
J
J
J
No Information.
To review the last-captured image, press the
OK
button. Press the
OK
button again to return to the camera mode.
1
Press down halfway
2
Press down fully
