TRAUMA F/X MCON, User Manual

Page: 6 / 24

I N T R O D U C T I O N
1
Chapter 1: Introduction
About the TraumaFX® Master Controller
The TraumaFX
®
Master Controller (MC) is a ruggedized controller used with the
all powered TraumaFX® upper and lower units. With its simplistic and durable
design, the MC provides end users with the ability to control multiple systems,
instant treatment feedback, and the ability for the trainer to customize user scenarios
in accordance with the learning opportunity at hand.
Compatible TraumaFX® Upper and Lower Units

Multiple Amputation Trauma Trainer (MATT)®

Packable Hemostatic (HEMO) Trauma Trainer

Clinical Response Lower (CRL)

AirwayPlus Lifecast – Intubation/Packable (APL-IP)

AirwayPlus Lifecast – Pulses/Breathing (APL-PB)

Clinical Response Upper (CRU)
The MC is designed for rugged use in realistic training environments, however is
not impermeable to damage. To ensure proper operation, do not subject the MC
unit to unnecessarily harsh treatment. Careful preventive maintenance and frequent
after-use inspection is essential to ensure the service life of your Master Controller.
Please review
Chapter 5: After Use Care which outlines the standard preventive
maintenance required under the terms of the TraumaFX® limited warranty.
Item Checklist
The components listed below are required to set up and operate
your TraumaFX® Master Controller.
Standard Components and Accessories
Accessory Name Order Number
Slimline 18v Makita Battery KGS-TFX-SBT-1
Master Controller with case KGS-TFX-MCON-1
Figure 1
Chapter
1
