O P E R A T I N G T H E M A S T E R C O N T R O L L E R
11
•
Save to SD:
If an SD
card is inserted, the
Save to SD option
appears. When the file
has successfully been
saved, it gains a green
highlight (Figure 12).
Files are saved in the
TFXData folder in a
new subfolder based
on the Date and Time
the SD card was
inserted
(TFXData\YYYYMMdd_hhmmss). Every AAR file since the MC was
powered on will be saved in this subfolder.
•
Save All:
The Save All option allows all the files to be saved to the SD card
with one command instead of having to save each file individually.
•
Back or Close:
Returns to the Global Main screen (or the Focused Session
Control screen if focused on one remote-body pair).
AAR Error:
If an error occurs during the AAR process, the bytes progress will be replaced with
AAR Error
. You can still proceed to the AAR file list screen to view any AAR files
that have been successfully received. To retry getting an AAR file after receiving an
error, simply press
Back
and then
AAR
to restart the AAR pull process. Files that
were not pulled will show up as “AAR File Get Error” and will not have the
Rename, View, or Save to SD options available.
The two known AAR errors that cannot be fixed by retrying are 1) if the MC has
lost communication with the remote control transmitter (e.g. the remote was turned
off or died, the remote has a serial port problem, etc.) or 2) if the user tries to pull an
AAR file from a remote that does not have an AAR file to pull (either a session has
not been run yet or the session is still currently running). This can happen if you
run and stop a session on one remote-body set, select another remote-body set
which is still currently running, and then try to pull the AAR file for both.
Figure 12
