ENGLISH
46
www.trapp.com.br
Uses and Applications
The TRAPP shredders are designed to shred tree
pruning, plant remains, decorative plants, branches,
twigs, leaves, trees bark, vines, tubers leaves,
flowers, kitchen waste, etc.
Maximum crushing diameter of 8 cm on the side
hopper and 3 cm on the top hopper.
Do not use this shredder for purposes other than
those mentioned above. You can only use original
TRAPP spare parts.
Using the different forms of this shredder you can
achieve valuable compost.
Important:
The newly pruned material
should dry a bit before being crushed. This
process provides better performance of the
crusher, yielding a better composting.
Technical Characteristics
Specifications
BIO 300
BIO 300E
1)
BIO 300G
Cutting blade diameter (cm)
35
35
35
Cutting blade width (cm)
21
21
21
Cutting blade speed (rpm)
2600
2600
2600
Amount of hammers
28
28
28
Motor power (cv)
10 to 13.5
10
–
Gasoline motor power (HP)
10 to 13.5
–
13.5 HP (Briggs &
Stratton) or 15 HP
(TRAPP / Lifan)
Length without the handle (m)
1.00
1.00
1.00
Width (m)
1.15
1.15
1.15
Height (m)
1.22
1.22
1.22
Weight (kg)
129
189
162
Production (m
3
/h)
4 to 6
4 to 6
4 to 6
Note: 1) The machines are set by default missing the electrical connection for both the (on / off) switch and the electric
motor, being at the discretion of the customer to make the connection at the desired voltage, as available in that region.
The wiring diagram of the motor is available on the motor itself so that the customer can make the connection.
Note: TRAPP does not take responsibility or offers warranty coverage in the case the motor blows due to incorrect electric
connection, as described in the manual.