S4.16 HANDHELD LAYOUT
HANDHELD BATTERY INSERTION
1. Rotate the top collar locking ring in the
direction indicated in the illustration
and gently pull the body downwards.
2. Insert a 9V MN1604 (IEC 6 LR61) PP3 type
alkaline battery, being sure to observe the
correct polarity as marked.
3. Gently slide the body upwards and lock.
Note
: Should the Red battery status Led Indicator go out
during operation, this indicates a flattened battery and
that it should be changed.
CHANNEL SELECTION
. (Small screw-driver adjust)
With the Transmitter in the OFF position select a channel to correspond with
the Receiver. It is possible to select any of the 16 channels.
(
Factory set to position 1
).
Note
: If the Transmitter Active Channel has been changed whilst in the
ON
position, it
must be turned
OFF
and then
ON
again to complete selection.
4
ON/OFF
16 CHANNEL
SELECTOR
GRILLE
LOCKING RING
ANTENNA
BODY
BATTERY
STATUS
INDICATOR
S4.16 ARTWORK_final_1 colour 20/10/06 08:27 Page 8
