Should the receiver signal be too high it will distort your mixer/amplifier.
If the signal is too low the result will be an increase in general
background noise.
Adjust this control to achieve the best signal quality.
4.
BATTERY INFORMATION
.
Please note that this product is designed to be used with a 9V Alkaline
battery. Should you use a rechargeable cell, be sure not to force it into the
battery compartment as some types can be considerably larger than
standard types and note that the operation time will be much reduced.
5.
LOW-BATTERY STATUS INDICATOR ON TRANSMITTERS
.
In normal circumstances, with the use of an Alkaline 9V battery, the
Transmitters should provide approximately 10hrs of continuous use.
Should the Battery indicator go out, it is advisable to change the battery
as soon as possible.
FAULT-FINDING
.
In the event of a problem it is worth checking the following check list.
1.
No RF Signal Indication on Receiver!
a. Are the Receiver and Transmitter on the same channel?
b. Is the battery fresh in the Transmitter and the battery indicator lit?
2.
No Audio Signal!
a. Is the AF Gain Control set correctly on the Receiver?
b. Is the Squelch Control set correctly (Normally mid-position).?
c. Is the MIC/INST switch in the correct position on the Beltpack?
S4.16 SYSTEM PACKAGE CONTENTS
8
S4.16L SYSTEM:
S4.16RX
Receiver
S4.16MTX
Handheld Transmitter
PSU
Mains AC adaptor
MA2
Microphone stand
mount/adaptor
S4.16BK
Instruction manual.
S4.16H–EA–UK 863-865MHz
UK Power supply
BATTERY
9V Alkaline battery
S4.16M SYSTEM:
S4.16RX
Receiver
S4.16LTX
Beltpack Transmitter
PSU
Mains AC adaptor
LP2
Lapel type microphone
GC2
Instrument cable
S4.16BK
Instruction manual.
S4.16L–EA–UK 863-865MHz
UK Power supply
BATTERY
9V Alkaline battery
S4.16 ARTWORK_final_1 colour 20/10/06 08:27 Page 12
