S4.16 BELTPACK LAYOUT
BELTPACK BATTERY INSERTION
1. Slide the battery compartment to the rear and hinge upwards to expose
the battery.
2. Insert a 9V MN1604 (IEC 6 LR61) PP3 type alkaline battery, being sure to
observe the correct polarity as marked.
Note
: Should the Red battery status Led Indicator go out during operation, this
indicates a flattened battery and that it should be changed.
5
ROTATING
BELT
CLIP
BATTERY
STATUS
INDICATOR
BATTERY/
CONTROL
HOUSING
AUDIO
INPUT
ANTENNA
LP2
LAPEL MICROPHONE
ON/OFF
SWITCH
S4.16 ARTWORK_final_1 colour 20/10/06 08:27 Page 9