TS-‐NX/CL
INSTALLATION MANUAL
Page 19
Voice connection breaks
Table 4: Remote alarm reporting example
♦
Remote programming by SMS
;TN1=042376678;LN1=13;LN2=1234;LN7=1;LOT=60;
9.1.3 CONTROLING OUTPUTS WITH DTMF
TS-NX/CL can control the outputs with the use of DTMF. This is very useful
function in the intercom application.
To control the outputs the user must press the combination of 2 digits. First digit
is used to select the output (1 to 2), the second digit is used to activate (1) or
deactivate (0) the output. There is a special case when the user can select for
first digit (output selection) number 0. In this case all outputs control by the same
time.
Combination must be pressed in 2s interval, and must be 3s apart to be valid.
NOTE
TS-NX/CL must be in voice connection to support DTMF output control!
Example:
DTMF combination
Description
00
Deactivate ALL outputs
01
Activate ALL outputs
11
Activate output 1
20
Deactivate output 2
Table 5: DTMF control example
9.2 OUTPUT MANAGEMENT
TS-NX/CL supports the possibility to report alarms from inputs and any other
events locally via 2 outputs. The behavior is defined using next parameters
