EIS-1, EIS-2, EIS-4
USER MANUAL
Page 7
4
START UP
EIS unit accepts a standard GSM Sim (T-Mobile or AT&T) card.
VERY
IMPORTANT
USE A
MICRO SIM CARD
WARNING
DO NOT Insert or remove the SIM card while the unit is powered ON!!
IMPORTANT
Before inserting SIM card to unit make sure the PIN code is
removed!!
⇒
Insert SIM card in EIS unit.
⇒
Connect power cable to EIS unit (
YOU MUST POWER THE EIS UNIT WITH THE
POWER SUPPLY INCLUDED
). Do not power with any other power supply.
⇒
Power up the unit.
⇒
Wait until LED1 (Blue) starts flashing. This is set in around 30 – 45 seconds.
⇒
EIS unit is now ready to operate.
NOTE
EIS device will “beep” in 15s intervals until the unit reaches normal operation.
