EIS-1, EIS-2, EIS-4
USER MANUAL
Page 15
8.4
INTERCOM CONFIGURATION
Primary function of the EIS unit is intercom support. Selecting (calling) apartment number is
achieved pressing the call button beside appropriate name plate.
This actions will start a voice call procedure from
Phone number 1
till
Phone number 5
. After the
call is answered the called user has the option to trigger the output by pressing “11” for opening
Output 1 or “21”
for triggering Output 2.
If the call is answered the unit will stop dialing next numbers on the list.
** To terminate the call press any button.
Management of the intercom function is found under
Intercom
tab.
Figure 6: WEB Server-Intercom settings.
Intercom management parameters:
•
Telephone number 1…Telephone number 5:
Number that the unit will call when call
button pressed.
•
Delay before dialing next no. on the list:
Time delay in second before next user on the list
gets dialed if the call to the previous user is not answered.
•
Extension number:
Parameter is used to set the DTMF number in auto self-select function
•
Extension no.
delay:
Parameter is used to set the delay (in sec.) for sending DTMF number
in auto self-select function.
