2
1. Packing List
Name
Quantity
Remarks
Digital Keypad-BC-2010
1
User manual
1
Screw driver
1
Rubber bungs
4
6*27mm, used for fixing
Self tapping screws
4
3.5*27mm, used for fixing
Please ensure that all the above contents are correct. If any are missing please notify the
supplier of the BC-2010.
2.
BC-2010 Quick Reference Programming Guide
To enter the programming mode
* Master code #
888888 is the default factory master code
To exit from the programming mode
*
Note that to undertake the following programming the master user must be logged in
To change the master code
0 New code # New code #
The master code can be 6 to 8 digits long
To add a PIN user.
1 User ID number # PIN #
The ID number is any number between 1 & 1500. The
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved. Users can be added
continuously without exiting programming mode
To add a card user
1 Read Card #
Cards can be added continuously without exiting
programming mode
To delete a PIN or a card user.
2 User ID number # for a PIN user or
2 Read Card or Card ID number # for a card user
Users can be deleted continuously without exiting
programming mode
To unlock the door for a PIN user
Enter the PIN then press #
To unlock the door for a card user
Present the card
