7
To change the master code
0 New code # New code #
The master code can be 6 to 8 digits long
Setting the working mode:
Set valid card only users
Set valid card
and
PIN users
Set valid card
or
PIN users
3 0 #
Entry is by card only
3 1 #
Entry is by card
and
PIN together
3 2 #
Entry is by either card
or
PIN (default)
To add a user in either card or PIN mode, i.e. in the 3 2 # mode. (Default setting)
To add a
Pin
user
1 User ID number # PIN #
The ID number is any number between 1 & 1500. The
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved. Users can be added
continuously without exiting programming mode as
follows:
1 User ID no 1 # PIN # User ID no 2 # PIN #
To delete a
PIN
user
2 User ID number #
Users can be deleted continuously without exiting
programming mode
To change the
PIN
of a PIN user
(This step must be done out of
programming mode)
* ID number # Old PIN # New PIN # New PIN #
To add a
card
user (Method 1)
This is an easy way to enter the individual
cards using ID number auto generation.
1 Read Card #
Cards can be added continuously without exiting
programming mode
To add a
card
user (Method 2)
This is the alternative way to enter the
individual card using User ID Allocation.
In this method a User ID is allocated to a
card. Only one user ID can be allocated
to a single card.
1 ID number # Card #
To add a
series cards
users –
Block
Enrollment
5 ID number # 8 digits Card number # Card
quantity #
Card quantity is between 1-1500. Of the 8 digits card
number, for HID card, they are the 3 digits of a facility
code and 5 digits of a serial number; for EM card, they
are the last 8 digits on the card.
