6
NO and COM
: Fail-secure lock, when power on, the lock is opened.
NC and COM
: Fail-safe lock, when power off, the lock is opened.
8.
To Reset to Factory Default
To reset to factory default, power off the device, remove the keypad from the back cover, press
the RESET key(K2) on the PCB, hold it and power on, keeping pressing it until hear three
beeps, means reset to factory default successfully.
Note: Reset to factory default, the user’s information is still retained.
9. Anti Tamper Alarm
The BC-2010 is built-in tamper switch. If the keypad is removed from the cover then the
tamper alarm will operate.
10.
Sound and Light indication
Operation Status
Red Light
Green Light
Yellow Light
Buzzer
Power on
-
Bright
-
Short Ring
Stand by
Bright
-
-
-
Press keypad
-
-
-
Short Ring
Operation successful
-
Bright
-
Short Ring
Operation failed
-
-
-
3 Short Rings
Enter into programming mode
Bright
-
-
Short Ring
In the programming mode
-
-
Bright
-
Exit from the programming
mode
Bright
-
-
Short Ring
Open the door
-
Bright
-
Short Ring
Alarm
Bright
-
-
Alarm
11.
BC-2010 Detailed Programming Guide
11.1 User
Settings
To enter the programming mode
* Master code #
888888 is the default factory master code
To exit from the programming mode
*
(Before exit from the programming mode, press # is to
confirm the operation step.)
Note that to undertake the following programming the master user must be logged in
