Transition Networks
SDSTX3110-121S-LRT User Guide
33745 Rev. A
https://www.transition.com
Page
29
of
109
Ethernet tab
This page lets you assign the required IP address for the device before it is attached to your network.
Your network admin should provide the IP address and related settings. The IP address must be unique
within the network (otherwise a valid network connection can’t be made). You can choose from two possible
IP configuration modes: Static IP or DHCP/BOOTP. The factory default IP address is 192.168.1.77.
Wire Sub-Tab
Label
Description
Using Static IP
Check the box to manually assign an IP address to the device.
Using DHCP/BOOTP
Check the box to have the IP address automatically assigned by a DHCP
server in your network.
IP Address
Enter the IP address of the serial device server.
Netmask
All devices on the network must have the same network mask to
communicate on the network.
Gateway
Enter the IP address of the router on your network.
DNS 1 / DNS 2
Enter the IP address of the primary and secondary DNS servers.
The DNS server translates domain names into IP addresses.
