Transition Networks
SDSTX3110-121S-LRT User Guide
33745 Rev. A
https://www.transition.com
Page
85
of
109
3. System Log setting
Select one function (1-3, Q):
3
-----------------------------------------
[System Log settings]<System Log server>
A. Server address: 192.168.1.99
B. Port: 2
<Event Type>
1. Cold start Enable
2. Warm start Disable
3. Authentication failure Enable
4. IP address changed Enable
5. Password changed Enable
6. Access IP block Enable
Q. Exit
Select one function (A-I,1-9,Q):
c. Change Password
Enter a
c
and hit the Enter key to display the option to change passwords:
Select one function (0-9,A,C,L,S,R,Q):
c
-----------------------------------------
[Change Password]
Input old password:
l. Load Factory Defaults
Enter a letter
l
and hit the Enter key to display the option to load the factory default settings:
Select one function (0-9,A,C,L,S,R,Q):
l
-----------------------------------------
[Load Default]
Are you sure? (Y/N)
s. Save configuration
Enter an s and hit the Enter key to display the option to save the existing configuration to a file.
Select one function (0-9,A,C,L,S,R,Q):
s
-----------------------------------------
[Save to file]
Are you sure? (Y/N) y
Saving to flash memory...
-----------------------------------------
