PSV-2/14-45 IN THE NETWORK
The PowerStar™ V allows various host input connection options.
When the PowerStar™ V is within approximately 460 meters (2 Mb/s
Express mode) or 760 meters (1 Mb/s standard mode) of the host, the
link from the host to the PowerStar™ V can be made by installing a
twinax balun at the host and then connecting twisted-pair cable
between the twinax balun and one of two RJ-45 LINK connectors at the
front of the PowerStar™ V. A second connection can be made to the
second RJ-45 LINK connector.
When the PowerStar™ V is within approximately 1200 meters (2 Mb/s
Express mode) or 1520 meters (1 Mb/s standard mode) of the host, if the
optional twinax slide-in-card (SIC), PS-T-SIC, is installed in the
PowerStar™ V, the link from the host to the PowerStar™ V can be made
by connecting twinax cable between the host and one of two (2) twinax
connectors on the slide-in-card at the back of the PowerStar™ V. A
second connection can be made to the second twinax connector on the
slide-in-card.
When the PowerStar™ V is within approximately 3000 meters (2 Mb/s
Express mode OR 1 Mb/s standard mode) kilometers of the host, if the
optional fiber slide-in-card, PS-T-SIC, is installed in the PowerStar™ V
and a compatible twisted-pair/fiber media converter (such as the
TRANSITION Networks IBM® 5250) is available, the link from the host
to the PowerStar™ V can be made by installing a twinax balun at the
host, then connecting twisted-pair cable between the balun and the
media converter, and then connecting fiber from the media converter to
one of two (2) fiber connectors on the slide-in-card at the back of the
PowerStar™ V. A second connection can be made to the second fiber
connector on the slide-in-card.
When the PowerStar™ V is within approximately 3000 meters of the
host, if the optional twinax slide-in-card is installed in the PowerStar™
V and a compatible twisted-pair/fiber media converter (such as the
TRANSITION Networks IBM® 5250) is available, the link from the host
to the PowerStar™ V can be made by installing a twinax balun at the
host, then connecting twisted-pair cable between the balun and the
media converter, connecting fiber from the media converter to a`second
media converter, installing another twinax balun on the twinax slide-in-
card, then connecting twisted-pair cable between the media converter
and the balun. A second connection can be made to the second twinax
connector on the slide-in-card.
Connection from the PowerStar™ V to terminal devices is through
twisted-pair copper cable and RJ-45 connectors.
TECHNICAL SPECIFICATIONS
Host Connection
IBM
®
S/3x (System 34, 36, 38), AS/400™ Host or
AS/400
™
Controllers
Dimensions
17.0" x 7.5" x 1.7"
(432 mm x 191 mm x 43 mm)
Power
Input Range:
85 to 265 VAC at 47 to 63 Hz. Rated at 40 watts
maximum.
Power Cord:
TN PN
Requirement
Location
3344
120 volts, 60 hertz
USA/Canada/Mexico
3344
100 volts, 50-60 hertz
Japan
3347
230 volts, 50 hertz
Europe
3348
240 volts, 50 hertz
Australia
3349
240 volts, 50 hertz
United Kingdom
Environment
Temperature:
0-50°C (32° to 122° F )
Humidity
10-95%, non condensing
Altitude
0-10,000 feet
Storage Temperature
-40 to 85C (-40 to 185F)*
*Must be stable within operating environment limits before powering on.
Warranty
Lifetime
DECLARATION OF CONFORMITY
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model:
PowerStar
™
V
Part Number:
PSV-2/14-45
Regulation:
EMC Directive 89/336/EEC
Purpose: To declare that the PSV-2/14-45 to which this declaration refers is in
conformity with the following standards.
EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992;
EN 60950 A4:1997; IEC 801.2, IEC 801.3, and IEC 801.4; IEC 950
I, the undersigned, hereby declare that the equipment specified above conforms to the
above Directive(s) and Standard(s).
_September 30, 1999_____
Stephen Anderson, Vice-President of Engineering
Date
