background image

18

1

PowerStar™ III

1. INTRODUCTION

This guide is intended for the system or network administrator
responsible for installing and monitoring a TRANSITION Networks
PowerStar™ III. A working knowledge of AS/400™ peripheral
connections and operations, including familiarity with communications
protocols used, is assumed.

The PowerStar™ III

The PowerStar™ III, available in various models (PSIII-1/7-11, PSIII-1/7-
45, PSIII-1/7-11-T, PSIII-1/7-45-T, PSIII-2/14-11, PSIII-2/14-45, PSIII-
2/14-11-T, PSIII-2/14-45-T), is an active star repeater for AS/400™ and
S/3x environments that can be used for converting a twinax daisy chain
topology to an unshielded twisted pair star topology.

The PowerStar III is designed to support all 5250 compliant devices
operating at approximately 1Mbps.

Host controller link can be connected either through a twisted pair
connector at the front of the PowerStar™ III or, if the optional
twinax connector is installed, through the twinax connector at the
back of the PowerStar™ III.

Twisted pair port connections are identified, by PowerStar™ III
model number, as either RJ-11 or RJ-45 connectors.

Separate transceiver circuitry isolates each port.

The following pin configurations are selectable:

RJ-11 pins 3 & 4 or 2 & 5 optionally active 

(factory default: pins 3 & 4 active)

RJ-45 pins 1 & 2, 3 & 6, or 4 & 5 optionally active; 

(factory default: pins 4 & 5 active). 

PowerStarIII

Link

0

1

2

3

4

5

6

Line Sync

Parity Error

Link

0

1

2

3

4

5

6

Line Sync

Parity Error

The sole purpose of this remedy shall be provided the customer with the replacement or
repair of non-conforming goods in the manner described in this Warranty statement. This
exclusive remedy shall not be deemed to have failed of its essential purpose so long as TN is
willing and able to repair or replace the defective item(s) or refund the purchase price. 

TN reserves the right to inspect products claimed to be defective under warranty either at the
customer’s location or at TN’s plant. TN assumes no liability for liability charges incidental
to the adjustment, service, repairing, removal or replacement of the product, or other costs,
or the expense of repairs made outside of its factory, except when made with TN’s prior
written consent. Additionally, Transition Networks reserves the right to charge for all testing
and shipping incurred, if after testing, a return is classified as “No Problem Found”.

TN’s total liability in connection with the products and their installation to all persons and
from all causes in the aggregate, whether in contract, tort, or strict liability, shall not exceed
the amount paid to TN for the product directly related to the alleged damage. However, in
no event shall TN have any liability to a customer or any third party for products
manufactures according to the customer’s specifications.

C. Return Procedure
The customer must follow this procedure for the return of defective items:

1. Locate the serial number(s) of the item(s) to be returned.
2. Determine the date the item(s) was received.
3. Contact Transition Networks Technical Support to determine if the problem can be

corrected on site.

If not, and the product is covered by warranty, then:

• Call the distributor directly or contact TN.
• Request a Return Material Authorization (RMA).
• Ship the item, prepaid in original packaging to Transition Networks at the above

address.

• Include the RMA number on the outside of the carton and/or on the Packing List.
• Include a copy of the RMA form.
• Include a copy of the original invoice or packing list (if possible) to expedite

processing.

• The item(s) may be shipped by the customer or the distributor.
• Transition Networks will repair or replace the unit, at TN’s discretion, and cover the

cost of the return freight to the distributor or to the customer, whichever requested
the RMA number.

If the item(s) was received more than five years ago, or if the item(s) is no longer covered by
warranty 
for other reasons, then:

• Call the distributor or contact TN.
• Request a Material Repair Authorization number (MRA).
• Ship the item(s), prepaid, in the original packaging to Transition Networks at the

above address.

• Include the MRA number on the outside of the carton add/or on the Packing List.
• Include a copy of the MRA form.
• Include a copy of the original invoice or packing list (if possible) to expedite processing.
• Only the customer (end-user) may send the items(s) to TN.
• TN will contact the customer after the item(s) have been received, inspected, and a

cost estimate of the repair determined.

• The repair charges may be billed, with customer’s approval, though the distributor, or

on a prepaid or C.O.D. basis directly to the customer. The charges will include the
cost of shipping.

The return authorization numbers are valid only for 90 days from the date issued.

Front of PSIII-2/14-45 or of PSIII-2/14-45-T

Summary of Contents for PowerStar III













Reviews: