background image

Technical Support: 1.888.202.3344  or  [email protected]     

  

QUICK INSTALLATION GUIDE

www.hawkingtech.com

Hi-Gain

 Outdoor Wireless-N Dual Radio Smart Repeater

Part No. HOW2R1

Start 

Here

 

3. Connect to the Repeater 

Using a computer with wireless networking access, 

connect to the Repeater by searching for the wireless 

network named: 

Outdoor_Repeater

 

To create a wired LAN connection, an ethernet cable 

may be connected to the LAN port of the PoE injector.

   Click 

Next

 to continue.

5. Scan for your Network

Click 

Scan

 to find your wireless Internet connection.  

After the list appears, select the connection and click

Connect

.  

If the signal strength is low or your network does not 

appear, you may need to readjust your location of 

your Repeater or the position of its antennas. 

Click 

Scan

 to try again.

Click 

Next

 to continue.

    

 4. Open a Web Browser 

Using the same computer, open a web browser and type 

in the following web address in the web address bar:

http://setup.hawkingtech.com   

(If the above address fails use the following address in your web browser 
address bar:  http://192.168.1.220)

Once the page loads, 

enter the following 

login information:

Login: 

admin

Password: 

1234

Click 

Login

 to 

continue.

Outdoor_Repeater

•  Pentium compatible PC or above w/ CD-ROM

•  802.11b, 802.11g or 802.11n Wireless Network

A

A

B

Hi-Gain

 Outdoor

Dual Radio Smart Repeater

 Powe over Ethernet

Injector

C

Set up your hardware according to the diagram on the left for the initial 

setup of the Outdoor Smart Repeater.  After the initial setup is complete, 

you may mount the Outdoor Repeater in your desired location. 

A.   Attach the antennas to the antenna connectors

 

(optional: the L-shape antenna connector is used to estab-

lish signal diversity for more wireless range.)

B.  Attach an Ethernet cable from the PoE Injector to the 

Ethernet Port on the Outdoor Smart Repeater

C.  Attach the power adapter and power cable to the PoE 

Injector

•  1 x Power Cable and 

    Power Transformer  
•  1 x Ethernet Cable
•  1 x Mounting Kit
•  1 x Setup CD-Rom

Check Package Contents

•  1 x Hi-Gain

 Outdoor Wireless-N 

     Dual Radio Smart Repeater
•  2 x Hi-Gain Outdoor Antennas
•  1 x PoE Injector
•  1 x L-shape antenna connector
•  1 x Waterproof Gasket Kit for RJ-45

1. System Requirements

2. Initial Configuration: Hardware Setup

Your Hi-Gain

 Outdoor Wireless-N Dual Radio Smart Repeater should be placed in an 

optimal location in your home or office to obtain the best performance.  Find a location 

that is closest to the wireless Internet connection that you are trying to connect to.

A. Direct the Outdoor Smart Repeater’s Directional Antenna towards the Source of 

your Wireless Internet Connection

The Internal Hi-Gain Wireless Directional Internet Antenna is designed so that the 

Hawking logo should be pointed towards your wireless source

See the diagram to the right for antenna orientation instructions

B. Plug in the Power Adapter

When you have completed the antenna setup, plug in the included power adapter from 

the PoE injector in an available power outlet.

2. Find an Installation Location

Make sure the Repeater is placed in a location where it can receive a 

strong signal from the wireless Internet connection you wish to connect 

to.  The Repeater will not work without a signal that it can repeat.

Wireless Internet 

Connection

Securely mount and position the HOW2R1 facing a wireless 
Internet connection

1

2

Scan and connect to an outside wireless network  

All manuals and user guides at all-guides.com

all-guides.com

Reviews: