Transition Networks
N-TGE-SFP-02 User Guide
33819 Rev. A
Page
6
of
22
N-TGE-SFP-02 with Low Profile Bracket and Open SFP Slots
Changing the Bracket (Optional)
The NIC ships with the Standard bracket attached; an optional low profile bracket is included. Use the
following procedure to change brackets.
1.
Ground yourself to dissipate any static charge.
2.
Remove the two screws securing the standard bracket to the back side of the NIC.
3.
Slide the standard bracket away from the NIC.
4.
Slide the low profile bracket onto the adapter.
5.
Attach the low profile bracket to the NIC using the two screws you removed in step 2.
6.
Carefully tighten the screws until they are seated. Do not over-tighten the screws.
You can re-attach the standard bracket later if necessary.
N-TGE-SFP-02 with Standard Bracket attached and Low Profile Bracket
