background image

Transition Networks

 

 

 

 

 

            N-TGE-SFP-02 User Guide

 

33819 Rev. A

 

https://www.transition.com

 

 

Page 

12

 of 

22

 

Additional Driver Information 

Windows 10

 

Intel® Network Connections Software and Drivers: 

https://downloadmirror.intel.com/25016/eng/readme.htm

 

 

Readme for Intel(R) Ethernet Network Adapter X710-T2L for OCP 3.0: 

https://downloadmirror.intel.com/22283/eng/readme.txt

 

Release Notes for Intel(R) Network Connections Software Version 25.0: 

https://downloadmirror.intel.com/25016/eng/readme.txt

 

 

Complete Driver Pack (Windows, Linux, and FreeBSD)

 

Intel® Ethernet Adapter Complete Driver Pack Version: 25.0 (Latest): 

https://downloadcenter.intel.com/download/22283/Intel-Ethernet-Adapter-Complete-Driver-Pack

.

 

This. zip file 

contains all of the Intel® Ethernet network drivers and software for currently supported versions of Windows*, 
Linux*, and FreeBSD* for most Intel® Ethernet Adapters.

 

Readme for Intel® Ethernet Adapter Complete Driver Pack Version:  

https://downloadmirror.intel.com/22283/eng/readme.txt

 

 

Update Both NVM and Driver Simultaneously

 

Using the Intel NVM Update Package is the recommended way to update the NVM image. The NVM Update tool 
also asks about creating a backup copy before the update occurs, which is recommended. 

Note

 that selecting the 

wrong image through the driver boot option tab to update may cause issues. 

 

Keeping up with software changes, performance enhancements, or security updates requires the most current 
hardware drivers for supported systems. Previous updates to Intel network drivers were driver specific. 
Currently, both the firmware (device NVM image) and network drivers are field-serviceable, allowing the NVM 
image and network driver to be updated as a matched set. Updating the device image and the driver together 
can increase numerous key features. 

 

Note

: Updating to the most current NVM (with the NVM Update Package) and driver does not update the Option 

ROM. Intel recommends an Option ROM update after the NVM and driver are updated. 

 

Note

: When running SR-IOV, it is recommended that all Virtual Functions be disabled before the NVM Update 

process.

 

Obtaining New NVM/Driver Images

 

See the 

Intel Download Center

 

for the latest NVM Packages for Windows, Linux, and FreeBSD at 

http://downloadcenter.intel.com/download/24769

. 

Use the Software/NVM Matrix tables in the Intel Ethernet 

Controller 

X710

 

Feature Support Matrix to ensure compatibility. These documents are continuously maintained 

and always current. In the webpage section “This download is valid for the product(s) listed below” select 

X710-

BM2

This package contains all files required to update the non-volatile memory (NVM) on the Intel® Ethernet 

Adapters in your system. It contains the NVM Update Utility, configuration file, updated NVM binaries, and 
required driver files. See the readme file for more information, such as limitations and prerequisites, etc.

 

 

 

Summary of Contents for N-TGE-SFP-02























Reviews: