36
SNMP
Configuring device name, location, contact, the "get request", "set request" and
Trap community string. The default value of get request, set request and Trap
community is “
public
”. These three parameters must be correctly to performed
"get request" from the management unit, "set request" to the management unit
and send trap to the management unit, then click
Apply to have the
settings taken effect. There are up to 4-trap management stations could set to
receive the trap packets from the 16-slot chassis converter. Check marks the
“
send traps to the following management stations
” and fill in the IP address
of trap management station. Remember to set the
Trap community
while
send and receive trap packet between the converters and trap management
stations. The trap community must be same between the converters and trap
management station. At last, click Apply to have the configuration taken
effect.
SNMP interface
Summary of Contents for Milan MIL-RCM16A-V2
Page 20: ...15 The Main Menu...
