30
Module
State: It displays the module current status. User can enable or disable
the module state. When the state is disabling, this module cannot be
configured
Mode: It shows the module mode. The mode was auto detected by
system when installed on the device. When the mode is TS-1000, it means
this module supports TS-1000 standard and then click TS-1000
configuration button to configure the TS-1000 function
LLF enable/disable: When the RJ-45 or Fiber is link down, it will force the
other port disconnect automatically. The forced way is depends on the
RJ-45 control Fiber or Fiber control RJ-45 port. The LLF default is “RJ-45
Control FX” and other selections are “Fx Control RJ-45” and “Disable”.
On the module that support TS-1000 only can enable or disable the LLF
function but can not configure the LLF direction
Default: set the module back to default value
TS-1000 setting: click
config # to enter the TS-1000 setting interface
Summary of Contents for Milan MIL-RCM16A-V2
Page 20: ...15 The Main Menu...
