13
the power switch on.
Check the front panel Power indicator to see if power is properly supplied. The
device with the universal power supply, so there is no more adjustment
needed.
Diagnostic Test
After the installation is completed and AC power is applied to the device
properly, the system will automatically perform a diagnostic testing. When the
Power LED is on within 4 seconds, the CPU Ready LED will become “Blink”
and then the system is ready. On the other hand, if the CPU LED always light
on, it means system crash.
Connecting the Device via Local console or Telnet
The serial console port is a male DB-9 connector that enables the connection
from PC or terminal for monitoring and configuring the Device.
Use the supplied RS-232 cable with a female DB-9 connector to link the
terminal or PC to the console port.(The terminal or PC must support the
terminal emulation program)
For the telnet management, user has to set the device IP address that the
same network class with PC’s. (For example; it factory default IP address is
192.168.1.
77
, then the PC IP address should be 192.168.1.156)
Default login user name: root
Default login password: root
Summary of Contents for Milan MIL-RCM16A-V2
Page 20: ...15 The Main Menu...
